Backrest Assembly Overview

Backrest Assembly Overview






1 Seat pan

2 Bolt

• self-locking

• Replace after each disassembly

• Threaded holes for screws must be cleaned, for example, with thread cutter

• 33 Nm

3 Backrest

• Removing and Installing, refer to => [ Backrest ] Backrest

4 Button

• With entry assist

• Removing and Installing, refer to => [ Entry Assistance Button ] Entry Assistance Button

5 Handle

• With bracket (entry assistance)

• Removing and Installing, refer to => [ Entry Assistance Handle with Bracket ] Entry Assistance Handle with Bracket

6 Entry assist trim

• Removing and Installing, refer to => [ Entry Assistance Trim ] Entry Assistance Trim

7 Wiring harness

• From the side airbag to the connector station

• Depending on optional equipment, there may be more wiring harnesses, such as for seat heating, lumbar support