Backrest Assembly Overview

Backrest Assembly Overview






1 Seat Pan

2 Screws

• 33 Nm

• Self-locking

• Always replace if removed

• Threaded holes for screws must be cleaned, for example, with thread cutter

3 Backrest

• Removing and installing, refer to => [ Front Backrest ] Front Backrest

4 Headrest

• Removing and installing, refer to => [ Headrests with Locking Mechanism ] Headrests With Locking Mechanism

5 Entry Assistance Backrest Release

• Assembly overview, refer to => [ Entry Assistance, Seatback Release Assembly Overview ] Entry Assistance, Seatback Release Assembly Overview

• Removing and installing, refer to => [ Entry Assistance Handle with Bracket ] Entry Assistance Handle With Bracket

6 Entry Assist Trim

• Removing and installing, refer to => [ Entry Assistance Trim ] Entry Assistance Trim

7 Wiring Harness

• Running from the side airbag to the coupling station.

• Depending on optional equipment, there may be more wiring harnesses, such as for backrest heating, lumbar support

8 Release Cable

• For seat forward/back adjustment

• Removing and installing, refer to => [ Seat Forward/Back Adjuster Release Cable ] Seat Forward/Back Adjuster Release Cable

Tightening Specification, Retaining Plate for the DVD Player





- Tighten the retaining plate screws - 1 - to 6 Nm.

Tightening Specification, DVD Socket





- Tighten nut - 2 - to 0.4 Nm.