DVD Player Retaining Plate

DVD Player Retaining Plate

Removing






- Remove the front cover with the cushion. Refer to => [ Backrest Cover with Cushion ] Backrest Cover With Cushion.

- Remove the bolts - 1 -.

- Remove the retaining plate - 2 - for the screen console.

- Remove the nut - 2 -.






- Guide the socket - 4 - and washer - 3 - out of the mount - 1 -.

Installing

Installation is reverse of removal, but note the following:

- Pull the washer - 3 - up and slide the socket - 4 - from the side into the mount - 1 -.

• The socket must fit in the center of the mount.

- Hold the socket in this position and tighten the nut.

- Install the retaining plate hooks into the backrest frame - 3 - - arrows -.






- Tighten the bolts.

Tightening specifications, refer to => [ Tightening Specification, Retaining Plate for the DVD Player ] Backrest Assembly Overview, => [ Tightening Specification, DVD Socket ] Backrest Assembly Overview.