Headrests with Locking Mechanism

Headrests with Locking Mechanism

• The headrests can be removed with front seat installed.

• The release button is located on the outer left of the driver seat and inner left of the passenger seat.

Removing





- Find the release button pressure point - 3 -, it is located under the backrest cover.

- Press the release button forward in the - direction of the arrow -.

- Hold the release button down in this position.

- Pull the headrest - 2 - out of the guides - 1 - and - 4 -.

• If the release button does not work as described, then remove the backrest cover. Refer to => [ Backrest Cover ] Backrest Cover. Reach under the backrest cover and find the release button pressure point.

Installation

Installation is reverse of removal, but note the following:

- Make sure the headrest is engaged correctly in headrest guides.