Seat Forward/Back Adjustment Handle

Seat Forward/Back Adjustment Handle

• Removal and Installation can be done with the seat installed.

Removing





- Bring headrest into lowest lock position.

- Press the seat forward/backward handle and move the seat as far back as possible.

- Pry the handle - 1 - off the seat forward/backward adjustment - 2 - by using a screwdriver to press down the clip locking spring.

• If it is not possible to remove the handle as described, then remove the storage compartment. Refer to => [ Storage Compartment ] Storage Compartment.

Installation





Installation is reverse of removal, but note the following:

- Replace the clip on the seat forward/back adjustment handle. Note the installation position.

• The springs - arrows - on the clip - 2 - must be on the inner side of the lever - 1 -.

- Make sure the seat height adjustment handle engages correctly with the clips.