Balance Spring, Disengaging and Engaging

Balance Spring, Disengaging and Engaging

Disengaging

- Disengage the left and right springs - A - first from the guide bolts - B - with pliers.






- Pull the springs - A - then out of the brake pads - C -.

Engaging

- First install the left and right springs - A - into the lower hole in each brake pad - C -.






- Then engage them into the left and right guide pins - B - with pliers.

Make sure the springs are installed correctly to the guide bolts and brake pads - arrows -.

Making sure the springs - arrows - are installed correctly.