Diagram 3/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Battery interrupt igniter, Terminal 30 wire junction 2, Battery jump start terminal





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

C24 - Suppressor

J234 - Airbag control module Overview of Control Modules in interior of vehicle

J359 - Low heat output relay Overview Of Relay

J360 - High heat output relay Overview Of Relay

N253 - Battery interrupt igniter Overview Of Fuses

S39 - Engine glow plug fuse strip Overview Of Fuses

S126 - Auxiliary heater fuse Overview Of Fuses

S130 - Secondary air injection pump fuse Overview Of Fuses

S328 - Auxiliary heater fuse 2 Overview Of Fuses

SA - Fuse panel A Overview Of Fuses

T2y - Double connector

TV22 - Terminal 30 wire junction 2

T100 - 100-pin connector Locations

U6 - Battery jump start terminal

(A52) - Positive connection 2 (30) (in instrument panel wiring harness)

(D75) - Positive connection 2 (30) (in engine compartment wiring harness)

* - Refer to applicable airbag wiring diagram

*2 - Only for vehicles with diesel engines

*3 - Only for vehicles with gasoline engine

*4 - Refer to applicable engine wiring diagram

Previous Diagram 3/3 (Tracks 15-28)

Next Diagram 3/5 (Tracks 43-56)