Diagram 75/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Starter, Generator, Terminal 30 wire junction 2





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

B - Starter

C - Generator

C1 - Voltage regulator

J500 - Power steering control module

J533 - Data bus on board diagnostic interface Overview of Control Modules in interior of vehicle

S204 - Fuse 1 (terminal 30) Overview Of Fuses

S205 - Fuse 2 (terminal 30) Overview Of Fuses

S206 - Fuse 3 (terminal 30) Overview Of Fuses

T2n - Double connector

T17e - 17-pin connector, in the left A-pillar connector station Overview Of Connector Stations

T17r - 17-pin connector, in the E-box Overview Of Connector Stations

T20d - 20-pin connector Locations

TV22 - Terminal 30 wire junction 2

U6 - Battery jump start terminal

(12) - Ground connection in engine compartment, left Locations

(B698) - LIN bus connection 3 (in main wiring harness)

* - Refer to applicable coolant fan wiring diagram

*2 - Only for vehicles with Stop/Start system

Previous Diagram 75/4 (Tracks 29-42)

Next Diagram 75/6 (Tracks 57-70)