Diagram 27/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Light switch, Left rear level control system sensor, Headlamp range control module, Vehicle electrical system control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E1 - Light switch

G76 - Left rear level control system sensor Electronically Controlled Damping Assembly Overview

J431 - Headlamp range control module Overview of Control Modules in interior of vehicle

J519 - Vehicle electrical system control module Overview of Control Modules in interior of vehicle

J533 - Data bus on board diagnostic interface Overview of Control Modules in interior of vehicle

ST1 - Fuse panel 1

SC6 - Fuse 6 (on fuse panel C) Overview Of Fuses

T4o - 4-pin connector

T4t - 4-pin connector

T17w - 17-pin connector, white Overview Of Connector Stations

T20d - 20-pin connector Locations

T26a - 26-pin connector Headlamp Range Control Module -J431- / Headlamp Range/Cornering Lamp Control Module -J745-

T32a - 32-pin connector Vehicle Electrical System Control Module -J519-

(366) - Ground connection 1 (in main wiring harness)

(638) - Ground connection on right A-pillar Locations

(B385) - Powertrain CAN bus high connection 3 (in main wiring harness)

(B392) - Powertrain CAN bus low connection 3 (in main wiring harness)

* - Refer to applicable wiring diagram for fuse positions

*2 - Only for vehicles without level control system

Next Diagram 27/3 (Tracks 15-28)