Left Charge Air Cooling Circuit Radiator

Left Charge Air Cooling Circuit Radiator

Special tools, testers and auxiliary items required

• Hose Clamps Up to 25 mm Dia. (3094)

• Drip Tray for VAS 6100 (VAS 6208)

Removing






- Remove front bumper cover.

- Remove the left front wheel.

- Remove the left front wheel housing liner.

- Remove the air duct - 1 - - arrow -.

- Remove the nuts - arrows - and lower the bracket - 1 - with the left charge air cooling circuit radiator just a little.






- Place the (VAS 6208) under the left front charge air cooling circuit radiator.






- Disconnect and remove the coolant hoses and (3094) , to do this, loosen the hose clamps - arrows -.

- Remove the left charge air cooling circuit radiator - 1 - upward from the bracket.

Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Radiator and Coolant Fan Overview ] Radiator and Coolant Fan Overview.

• Secure all hose connections with hose clamps of the same type as those equipped by the factory, refer to the Parts Catalog.

- Install the front wheel housing liner..

- Install the front wheel.

- Install front bumper.

- Fill with coolant => [ Filling ] Service and Repair.

• All of the coolant must be changed if the radiator was replaced.