Cornering and Headlamp Range Control Modules (J431)/(J745)

Cornering and Headlamp Range Control Modules (J431)/(J745)

The parking aid control module is integrated in the vehicle electrical system control module (J519) depending on the date of manufacture from MY 2012 and cannot be replaced separately if defective. Refer to Electronic Parts Catalog (ETKA).

- Replace the vehicle electrical system control module, refer to => [ Vehicle Electrical System Control Module (J519) ] Vehicle Electrical System Control Module (J519).

- If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or "Guided Functions" of the Vehicle diagnostic tester.

Removing






- Remove the glove compartment.

- Release the retaining clip - arrow - and remove the module - 1 - from the retaining frame.

- Disconnect the electrical connector - 2 -.

- To disconnect the electrical connector, press the catch - 1 - down, and swing the retaining bracket in the - direction of the arrow - and remove the connector.






Installing

Install in reverse order of removal, observing the following:

- Install the glove compartment.