Dynamic Steering Overview

Dynamic Steering Overview

• Additional information on dynamic steering can be found in Self Study Program No. 402 Audi Dynamic Steering.






1 Power Steering Pump

• with an electric control valve

• The control valve is only installed on vehicles with 6- and 8-cylinder engines.

• The power steering pump and control valve are one component and are replaced together.

• Installation location in vehicles with 4 and 6-cylinder engines: On the front left of the engine (belt drive).

• Installed location on vehicles with an 8-cylinder engine: Installed on the back of the engine on the left side (chain drive).

2 Actuator

• Must not be loosened or removed from the steering column.

• The actuator and steering column are one component and are replaced together.

• The system must be calibrated if the actuator is replaced. Refer to => [ Dynamic Steering Basic Setting ] Dynamic Steering Basic Setting.

• Removing and installing, refer to => [ Steering Column ] Steering Column.

3 Active Steering Control Module (J792)

• The system must be calibrated if the active steering control module (J792) is replaced. Refer to => [ Dynamic Steering Basic Setting ] Dynamic Steering Basic Setting.

• Removing and installing, refer to => [ Level Control System Control Module (J792) ] Level Control System Control Module (J792).