Antenna Amplifiers 2 (R111) and 3 (R112)

Antenna Amplifiers 2 (R111) and 3 (R112)

• The antenna amplifier 2/ antenna amplifier 3 are on the left and right C-pillars.

• Removal and installation is the same for both.

- Switch off all electrical consumers.

- Remove the key.

Removing

- Remove the C-pillar trim.

- Release and disconnect the connector from the antenna amplifier.

- Remove the screws - arrows - and remove antenna amplifier - 1 - from the C-pillar - 2 -.






Installing

- Perform the installation in reverse order.

Tightening specifications, refer to => [ Antenna System Overview ] Antenna System Overview.