Lane Change Assistance, Preparing For Calibration

Lane Change Assistance, Preparing for Calibration






1 Distance Laser (VAS 6350/2)

• For distance measurement

• Usage, refer to operating instructions

2 Calibration Tool for Lane Changing Assist (VAS 6350)

3 Water Level

• On (VAS 6350)

• To check horizontal position of calibration device

4 Catch Bracket

• For mounting distance laser (VAS 6350/2) for distance measurement

• Distance to wheel center sensors (VAS 6350/1) on rear wheels. Dimension - a - = 1700 ± 2 mm.

5 Wheel Center Sensor (VAS 6350/1)

• With wheel bolt adapter SW 16 and measuring paddle

6 Brand Emblem

• The laser point is aligned on the center of the brand emblem

7 Lane Change Assistance Calibration Device (VAS 6350/4)

• Is moved from right to left side of measuring field during calibration

• When installed correctly, vehicle electrical system voltage line must be connected at bottom left of calibration device (as seen in direction of travel)

8 Measurement Scale

• For positioning Lane Change Assistance Calibration Device (VAS 6350/4)

9 Line Laser (VAS 6350/3)

• With Laser eye protection

• On (VAS 6350)

• Switching on and off, refer to operating instructions

10 Plastic Foot

• Quantity 3

• Adjustable in order to adjust horizontal position of (VAS 6350)