Roof Trim Molding

Roof Trim Molding

• To remove roof trim molding, it is not necessary to remove the side window.






1 Roof Trim Molding

• Roof trim molding must not be twisted or bent.

- Remove the door seal from the body flange in the A-pillar and roof trim molding area.

- Drill off rivet heads of pop rivets, strike rivet shafts through and remove roof trim molding.

- Carefully pry the roof trim molding out of clips over the side window and remove it.

2 Side Window

3 Decorative Trim Strip

- To remove the B-pillar, pry it out of the clips on the roof beginning at the side.

- Pry out the side trim strip on the side panel out of the clips.

- Slide the trim molding down out of the roof trim molding.

4 Pop Rivet

• Quantity: 9 on the roof trim molding.