Divided Backrest Overview
Divided Backrest Overview
• The backrest is divided into 2/3 on the right and 1/3 on the left.
1 2/3 Right Backrest
• Optional equipment:
• Without the center armrest and storage compartment and without the center armrest and pass-through cover
• With the center armrest and storage compartment
• With center armrest and pass-through cover
• Removing and installing, refer to => [ Backrest ] Backrest
2 Trim
• For the right lock
Optional equipment:
• With lock cylinder
• Without lock cylinder (not shown in the illustration)
• Assembly overview, refer to => [ Lock Trim Overview ] Lock Trim Overview
• Lock cylinder without trim, removing and installing, refer to => [ Lock Trim, without Lock Cylinder ] Lock Trim, Without Lock Cylinder.
• Lock cylinder with trim, removing and installing, refer to => [ Lock Trim, with Lock Cylinder ] Lock Trim, With Lock Cylinder.
• The trim with lock cylinder is destroyed when removed
3 Headrest
• Assembly overview, refer to => [ Headrest and Headrest Guide Overview ] Headrest and Headrest Guide Overview
• Removing and installing, refer to => [ Headrest ] Headrest
4 Center Armrest
• With pass-through cover
• Vehicles with special equipment
• Assembly overview, refer to => [ Center Armrest with Pass-Through Cover Overview ] Center Armrest With Pass-Through Cover Overview
• Removing and installing, refer to => [ Center Armrest with Pass-Through Cover ] Center Armrest With Pass-Through Cover
5 Center Armrest
• With storage compartment (armrest with lockable cover)
• Vehicles with special equipment
• Assembly overview, refer to => [ Center Armrest and Lockable Storage Compartment Overview ] Center Armrest and Lockable Storage Compartment Overview
• The center armrest and storage compartment can only be removed and installed separately
• Center armrest, removing and installing, refer to => [ Center Armrest ] Center Armrest
• Storage compartment (armrest with lockable cover), removing and installing, refer to => [ Lockable Armrest Storage Compartment ] Lockable Armrest Storage Compartment
6 Center Armrest
• Without storage compartment with backrest cover and backrest trim
• Vehicles with special equipment
• Assembly overview, refer to => [ Center Armrest with Cover and Trim Overview ] Center Armrest With Cover and Trim Overview
• The center armrest as well as the backrest cover and trim can only be removed and installed separated.
• Center armrest, removing and installing, refer to => [ Center Armrest ] Center Armrest
• Backrest cover, removing and installing, refer to => [ Backrest Trim ] Backrest Trim
• Backrest trim, removing and installing, refer to => [ Backrest Cover ] Backrest Cover
7 Left 1/3 Backrest
• Removing and installing, refer to => [ Backrest ] Backrest
8 Right Locking Mechanism
• Assembly overview, refer to => [ Lock Overview ] Lock Overview
• Removing and installing, refer to => [ Lock, Removing and Installing ] Lock, Removing and Installing
9 Right Release Cable
• From the locking mechanism to the connector station
• Assembly overview, refer to => [ Lock Overview ] Lock Overview
• Removing and installing, refer to => [ Release Cable, Separating from Connector Station Retainer ] Release Cable, Separating From Connector Station Retainer
10 Release Cable
• With handle for the right remote release
• Assembly overview, refer to => [ Remote Release Overview ] Remote Release Overview
• Removing and installing, refer to => [ Release Cable with Remote Control Unlock Handle ] Release Cable With Remote Control Unlock Handle
11 Left Release Cable
• From the locking mechanism to the connector station
• Assembly overview, refer to => [ Lock Overview ] Lock Overview
• Removing and installing, refer to => [ Release Cable, Separating from Connector Station Retainer ] Release Cable, Separating From Connector Station Retainer
12 Release Cable
• With hand for the left remote release
• Assembly overview, refer to => [ Remote Release Overview ] Remote Release Overview
• Removing and installing, refer to => [ Release Cable with Remote Control Unlock Handle ] Release Cable With Remote Control Unlock Handle
13 Trim
• For the left lock
Optional equipment:
• With lock cylinder
• Without lock cylinder (not shown in the illustration)
• Assembly overview, refer to => [ Lock Trim Overview ] Lock Trim Overview
• Lock cylinder without trim, removing and installing, refer to => [ Lock Trim, without Lock Cylinder ] Lock Trim, Without Lock Cylinder.
• Lock cylinder with trim, removing and installing, refer to => [ Lock Trim, with Lock Cylinder ] Lock Trim, With Lock Cylinder.
• The trim with lock cylinder is destroyed when removed
14 Left Locking Mechanism
• Assembly overview, refer to => [ Lock Overview ] Lock Overview
• Removing and installing, refer to => [ Lock, Removing and Installing ] Lock, Removing and Installing
15 Outer Bracket
• Quantity: 2
• Clipped into the backrest shell
• Removing and installing, refer to => [ Outer Bracket ] Outer Bracket
16 Cover
• For the center bracket
• Removing and installing, refer to => [ Center Storage Compartment Cover ] Center Storage Compartment Cover
17 Bolt
• 9 Nm
18 Securing Bracket
• For the center bracket
• Removing and installing, refer to => [ Securing Bracket ] Securing Bracket
19 Center Bracket
• Removing and installing, refer to => [ Center Bracket ] Center Bracket
20 Inner Bracket
• Quantity: 2
• Removing and installing, refer to => [ Inner Bracket ] Inner Bracket
21 Screws
• Quantity: 4
• 16.5 Nm
Inner Bracket Bolt
1 Backrest shell
2 Grommet
3 Bolt
4 Cover disc