Support Plate

Support Plate

Special tools, testers and auxiliary items required

• Special Pop Rivet Pliers (V.A.G 1753A)

• Drill

• Protective Eyewear

Removing

• Follow all safety precautions when working on pyrotechnic components. Refer to => [ Safety Precautions ] Service Precautions.

• Before handling pyrotechnical components (for example, disconnecting the connector), the person handling them must "discharge static electricity". For example, by briefly touching the door striker pin.

- Remove the handle with bracket. Refer to => [ Entry Assistance Handle with Bracket ] Entry Assistance Handle With Bracket.

- Drill out rivets - 1 -.






- Remove the support plate - 2 - from the backrest frame - 3 -.

Installing

Install in reverse order of removal.