Rear Entry Lamps and Rear Door Warning Lamps

Rear Entry Lamps and Rear Door Warning Lamps

Removing





- Press the retaining tab - 1 - in using a flat-head screwdriver and pry the door warning lamp or entry lamp - 2 - out.

- Disconnect the electrical connector - 3 -.

Door warning lamps





- Carefully pry the cover over the lamp out - arrow -.

Entry lamps





- Release the retaining clips - arrows - and remove the cover - 1 - over the bulb.

All Vehicles





- Remove the bulb - 1 - on the rear side of the door warning lamp or entry lamp from the socket - 2 -.

Installing

Install in reverse order of removal, observing the following:

- Place the cover on the door warning lamp or entry lamp.

- Insert the door warning lamp or entry lamp into the opening and engage it on the opposite side.