Fog Lamp

Fog Lamp

Removing





- Switch off ignition and remove ignition key.

- Turn light switch into 0 position.

- Release retaining hooks - A arrows - with a screwdriver.

- Remove bumper cover air inlet grille - 1 - - arrow B -.

- Remove screws - 1 - and - 2 -.





- Remove the fog lamp - 3 - from the bumper cover while guiding the retaining tab - arrow - out of the mount.

- Disconnect the electrical connector.

Installing

• Tightening specification, refer to => [ Fog Lamps, Assembly Overview ] Fog Lamps, Assembly Overview.

Install in reverse order of removal, observing the following:

- Adjusting fog lamps, refer to => [ Headlamps, Checking and Adjusting Conditions ] Testing and Inspection.