Low Beam Headlamp or Daytime Running Lamp Bulbs

Low Beam Headlamp or Daytime Running Lamp Bulbs

Removing





- Remove headlamp housings. Refer to => [ Headlamp Housing ] Headlamp Housing.

- Remove the high beam/turn signal housing cover - 1 - from the headlamp housing - arrow -.

- Turn the bulb - 1 - counterclockwise - arrow - and remove it from the housing.





Installing

Install in reverse order of removal, observing the following:

- Insert the new bulb into the housing without touching the bulb with bare hands.

- Close the housing cover - 1 -. When doing this, the strap - 2 - must align with the mark - 3 - on the headlamp housing.





- Install the headlamp housing. Refer to => [ Headlamp Housing ] Headlamp Housing.