Parking Lamp or Side Marker Lamp Bulbs

Parking Lamp or Side Marker Lamp Bulbs

Removing





- Remove headlamp housings. Refer to => [ Headlamp Housing ] Headlamp Housing.

- Release the wire clamp - arrow - and remove the low beam/daytime running lamp bulb housing cover - 1 - from the headlamp housing.

- Remove the lamp bulb and socket - 1 - from the reflector - arrow -.





- Remove the parking lamp/front side marker lamp bulb - 2 - from the socket.

Installing

Install in reverse order of removal, observing the following:

- Insert the new bulb into the socket without touching the bulb with bare hands.

- Push socket into reflector until it engages noticeably.

- Close the housing cover and secure it the spring clip.

- Install the headlamp housing. Refer to => [ Headlamp Housing ] Headlamp Housing.