Clean Working Conditions

Clean Working Conditions

• Always clean the connection locations and the area around them before loosening.

• Clean the transmission and transmission components using cleaning solution (D 009 401 04).

• Use lint-free cloths when cleaning. Audi recommends the WYPALL X70/WORKHORSE cloth made by Kimberly-Clark Professional.

• Seal all open lines and connections immediately with clean plugs or caps from the engine plug set (VAS 6122).

• Place removed parts on a clean surface and cover them. Use foil or lint-free cloths.

• Carefully cover or plug unpacked components if repairs cannot be performed immediately.

• Only install clean components: Remove the replacement parts from their packaging just prior to installing them.

• Protect the disconnected connectors from dirt and moisture and only connect when they are dry.