Diagram 141/12 (Tracks 141-154)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Evaporative Emission (EVAP) Canister Purge Regulator Valve 1, Secondary Air Injection (AIR) Solenoid Valve, Fuel Metering Valve, Secondary Air Injection (AIR) Pump Relay, Secondary Air Injection (AIR) Pump Motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J299 - Secondary Air Injection (AIR) Pump Relay Overview of Relay Carrier

J623 - Engine Control Module (ECM) Overview of Control Modules

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 5.2L BXA Overviewsm

N112 - Secondary Air Injection (AIR) Solenoid Valve 5.2L BXA Overviews

N290 - Fuel Metering Valve 5.2L BXA Overviews

S130 - Secondary Air Injection (AIR) Pump Fuse Overview of Fuses

T60a - 60-Pin Connector, black (Connector A), on engine control module (ECM)

T94a - 94-Pin Connector, black (Connector B), on engine control module (ECM)

V101 - Secondary Air Injection (AIR) Pump Motor 5.2L BXA Overviews

(647) - Ground Connection 3 (on firewall) Overview of Ground Connections in Front Part of Vehicle

(D109) - Connection 7 (in engine compartment wiring harness)

* - Relay carrier electronics box in right plenum chamber

#### - Right-Hand Drive

Previous Diagram 141/11 (Tracks 127-140)

Next Diagram 141/13 (Tracks 155-168)