Diagram 141/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Throttle Valve Control Module, Accelerator Pedal Position Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G79 - Throttle Position (TP) Sensor Locations

G185 - Accelerator Pedal Position Sensor 2 Locations

G186 - Throttle Drive (for Electronic Power Control (EPC)

G187 - Throttle Drive Angle Sensor 1 (for Electronic Power Control (EPC)

G188 - Throttle Drive Angle Sensor 2 (for Electronic Power Control (EPC)

J338 - Throttle Valve Control Module 5.2L BXA Overviews

J364 - Auxiliary Heater Control Module

J393 - Comfort System Central Control Module Overview of Control Modules

J623 - Engine Control Module (ECM) Overview of Control Modules

T8a - 8-Pin Connector, black, on auxiliary heater control module

T10v - 10-Pin Connector, white, connector station electronics box in left plenum chamber Overview of Connector Stations and Connectors

T10y - 10-Pin Connector, black (Connector C), on comfort system control module

T17o - 17-Pin Connector, brown, connector station electronics box in left plenum chamber Overview of Connector Stations and Connectors

T60a - 60-Pin Connector, black (Connector A), on engine control module (ECM)

T94a - 94-Pin Connector, black (Connector B), on engine control module (ECM)

(D123) - Connection 21 (in engine compartment wiring harness)

(D125) - Connection 23 (in engine compartment wiring harness)

* - Models with auxiliary heater

Previous Diagram 141/7 (Tracks 71-84)

Next Diagram 141/9 (Tracks 99-112)