Center Defroster Vent

Center Defroster Vent

Removing






- Remove instrument panel. Refer to => [ Instrument Panel ] Instrument Panel.

- Remove bolts - arrows - on bottom side of instrument panel.

- Remove center defroster vent - 1 - up out of instrument panel.

Installation

Install in reverse order of removal. Note the following:

• When tightening nuts, ensure there is an even distance between the upper side of the instrument panel and the upper edge of the center defroster vent as well as an even gap all the way around.

For the correct tightening specifications; refer to => [ Instrument Panel Assembly Overview ] Instrument Panel Assembly Overview.