Diagram 48/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver door control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J386 - Driver door control module Component Locations

J533 - Data bus on board diagnostic interface Component Locations

T20a - 20-pin connector, in the left front door Door Routing

T20d - 20-pin connector Locations

T20f - 20-pin connector Driver's Door Control Module -J386-

Y7 - Automatic dimming interior rearview mirror

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

(B427) - Mirror auto-dimming signal connection 1 (in main wiring harness)

(B428) - Mirror auto-dimming signal connection 2 (in main wiring harness)

* - Refer to applicable standard equipment wiring diagram

*2 - Data bus wire (CAN bus)

*3 - Only for vehicles with automatic dimming interior rearview mirror

Previous Diagram 48/2 (Tracks 1-14)

Next Diagram 48/4 (Tracks 29-42)