Oil Pan, Engine

Fastener Tightening Specifications






Oil Pan - Tightening Specifications and Sequence

- Tighten the oil pan bolts in three stages as follows:

- Tighten the bolts from the oil pan to the cylinder block - 1 to 20 - in a diagonal sequence to 5 Nm.






- Tighten the bolts from the oil pan to the transmission - arrows - to 40 Nm.

- Tighten the bolts from the oil pan to the cylinder block - 1 to 20 - in a diagonal sequence to 15 Nm.

Oil Dipstick Guide Tube - Tightening Specifications

- Tighten the double bolt - arrow - to 6 Nm.






Balance Shaft Housing Bolts






A Collar bolt M7x40
B Collar bolt M7x70
C Collar bolt M7x90
D Collar bolt M7x55
E Sealing plug with O-ring

Balance Shaft Housing - Tightening Specifications and Sequence

- Replace the balance shaft housing bolts - arrows -.






- Tighten bolts in 3 stages as follows:

- Install bolts by hand as far as the stop.

- Tighten to 15 Nm in a diagonal sequence from inside to outside.

- Tighten an additional 90° in a diagonal sequence from inside to outside.