Bumper Cover Lower Section

Bumper Cover Lower Section

Removing

- Remove the rear bumper cover. Refer to => [ Rear Bumper Cover ] Rear Bumper Cover.

- Remove the bolt - 1 -.






- If equipped, remove the cover - 4 - for the trailer hitch.

- Open the clips - arrows - and remove the lower section - 3 - of the bumper cover from the bumper cover - 2 -.

Installation

• For the correct tightening specifications => [ Rear Bumper Cover, Parking Aid Sensor ] Rear Bumper Cover Overview.

Installation is reverse of removal, but note the following:

- The lower section of the bumper cover must audibly click when clipping into place on the bumper cover.

- Install the rear bumper cover. Refer to => [ Rear Bumper Cover ] Rear Bumper Cover.