Backrest Adjustment Hand Wheel

Backrest Adjustment Hand Wheel

Removing





- Press side panel - 2 - lightly in direction of backrest.

- Slightly lift and disengage retaining detent - 1 - using a screwdriver.

- Turn backrest adjustment hand wheel - 3 - and disengage another retaining detent.

- Remove hand wheel for backrest adjustment.

Installation

Installation is reverse of removal, but note the following:

- Hand wheel must be pressed on until it audibly engages.

• If the hand wheel for backrest adjustment sits loosely on the adjustment shaft, the hand wheel for backrest adjustment must be replaced.