Horn Bracket, From 06.2008

Horn Bracket, from 06.2008

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Removing






- Reach into the opening - arrow A - remove the lower air inlet grille - 1 - from the bumper - arrow B -.

- Disconnect the electrical connectors - 1 - and - 6 -.






- Free up the wire holder - 2 - on the bracket.

- Remove the screws - 4 - and - 5 -.

- Remove the bracket - 3 - and the high tone horn (H2) / (H7).

• The bumper cover is removed in the illustration.

Installing

Install in reverse order.

Tightening Specifications