Body Emblem

Rear Lid Emblems

• Outer edges of rear lid are used as reference edges.

Installing






- Warm vehicle and type designation to room temperature.

- Bonding surfaces must be dry and free from dust and grease.

- Clean outer panel with mineral spirits, treat with silicone remover and rub dry.

- Pull off backing paper and press on characters - 1 -, maintaining pressure for approx. 3 seconds.

- After gluing on, press on lettering further using an application roller.

Dimensional Data for Front-Wheel Drive Vehicles






• a = 30 mm

• b = 26 mm

• c = 149 mm

• d = 25 mm

• f = 151 mm

• g = 89 mm

Dimensional Data for All Wheel Drive (AWD) Vehicles






• a = 30 mm

• b = 26 mm

• c = 149 mm

• d = 25 mm

• e = 4 mm

• f = 151 mm

• g = 89 mm