Driver Side Window Regulator Switch

Driver Side Window Regulator Switch

Removing





- Switch off ignition and remove ignition key.

- Remove door trim. Refer to => [ Front Door Trim ] Front Door Trim.

- Remove armrest. Refer to => [ Armrest ] Armrest.

- Release retaining hooks on armrest side by pressing on retaining bar - arrows -.

- Carefully release retaining hooks - 2 - and - 3 - on trim side with a small screwdriver.

- Remove window regulator switch - 1 - downward out of switch mount.

Installation

Installation is reverse of removal, but note the following:

- Press window regulator switch into switch mount until retaining hooks engage.

- Install armrest. Refer to => [ Armrest ] Armrest.

- Install door trim. Refer to => [ Front Door Trim ] Front Door Trim.