Diagram 109/11 (Tracks 127-140)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Comfort system CAN bus high connection 1 (in main wiring harness), Comfort system CAN bus low connection 1 (in main wiring harness), LIN bus connection 1 (in main wiring harness), LIN bus connection 2 (in main wiring harness)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G273 - Interior monitoring sensor Locations

G397 - Rain/light recognition sensor

H12 - Alarm horn Locations

J393 - Comfort system central control module Overview Of Control Modules

J400 - Wiper motor control module Control Modules in Front Part Of Vehicle

J519 - Vehicle electrical system control module Control Modules in Interior Of Vehicle

J529 - Inclination sensor/anti-theft system control module Control Modules in Interior Of Vehicle Locations

J533 - Data bus on board diagnostic interface Control Modules in Interior Of Vehicle

T6g - 6-pin connector

T8h - 8-pin connector

T12e - 12-pin connector

T18 - 18-pin connector

T20d - 20-pin connector

T52b - 52-pin connector

T52c - 52-pin connector

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

(B528) - LIN bus connection 1 (in main wiring harness)

(B549) - LIN bus connection 2 (in main wiring harness)

* - Through April 2009

*2 - Only for vehicles with automatic headlamp assist

*3 - For vehicles with anti-theft alarm system

*4 - From May 2009

Previous Diagram 109/10 (Tracks 113-126)

Next Diagram 109/12 (Tracks 141-154)