Diagram 58/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Engine Coolant Level (ECL) Warning Switch, Brake Fluid Level Warning Switch, Instrument Cluster Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F34 - Brake Fluid Level Warning Switch

F66 - Engine Coolant Level (ECL) Warning Switch

G169 - Fuel Level Sensor 2

J162 - Heater Control Module Control Modules in Interior Of Vehicle

J285 - Instrument Cluster Control Module Control Modules in Interior Of Vehicle

J587 - Selector Lever Sensor Control Module

K14 - Parking Brake Indicator Lamp

K28 - Engine Coolant Level/Temperature (ECL/ECT) Warning Lamp

K65 - Left Turn Signal Indicator Lamp

K94 - Right Turn Signal Indicator Lamp

K118 - Brake System Warning Lamp

T32 - 32-Pin Connector, blue (Connector A)

(393) - Ground Connection 28 (in main wiring harness)

(401) - Sensor Ground Connection (in interior wiring harness)

(B340) - Connection 1 (58d) (in main wiring harness)

(B482) - Connection 18 (in main wiring harness)

(B708) - Instrument Cluster CAN Bus - High Connection 1 (in main wiring harness)

(B709) - Instrument Cluster CAN Bus - Low Connection 1 (in main wiring harness)

* - Only models with all-wheel drive

** - => Applicable Wiring Diagram Automatic Transmission

*** - => Applicable Wiring Diagram Heater

# - Not applicable, phased-in modification

Previous Diagram 58/2 (Tracks 1-14)

Next Diagram 58/4 (Tracks 29-42)