Diagram 132/14 (Tracks 169-182)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Reduced oil pressure switch, Charge air pressure sensor, Intake manifold runner position sensor, Throttle valve control module, Engine control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F378 - Reduced oil pressure switch

G31 - Charge air pressure sensor Locations [1][2]Air Temperature Sensor ( Ambient / Intake )

G186 - EPC throttle drive

G187 - EPC throttle drive angle sensor 1

G188 - EPC throttle drive angle sensor 2

G336 - Intake manifold runner position sensor Locations [1][2]Diagrams

J338 - Throttle valve control module Locations [1][2]Diagrams

J623 - Engine control module Control Modules in Front Part Of Vehicle

T6d - 6-pin connector

T6s - 6-pin connector, in the engine compartment

T14 - 14-pin connector, near the left front longitudinal member

T60 - 60-pin connector

T94 - 94-pin connector

(220) - Sensor ground connection (in engine compartment wiring harness)

(D130) - Connection (28) (in engine compartment wiring harness)

(D174) - Connection 2 (5V) (in engine wiring harness)

* - Running change

*2 - Only for vehicles without US equipment

*3 - Omitted as a running change

*4 - Only for vehicles with US equipment

Previous Diagram 132/13 (Tracks 155-168)

Next Diagram 132/15 (Tracks 183-196)