Diagram 126/17 (Tracks 211-224)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Rain/light recognition sensor, Wiper motor control module, Vehicle electrical system control module, Windshield wiper motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G397 - Rain/light recognition sensor

J400 - Wiper motor control module Control Modules in Front Part Of Vehicle

J519 - Vehicle electrical system control module Control Modules in Interior Of Vehicle

SB19 - Fuse 19 (on fuse panel B) Overview Of Fuses

SB31 - Fuse 31 (on fuse panel B) Overview Of Fuses

T40 - 40-pin connector

T52b - 52-pin connector

V - Windshield wiper motor

(44) - Ground connection on A-pillar, lower left Overview Of Ground Connections in Interior Of Vehicle

(98) - Ground connection (in rear lid wiring harness)

(381) - Ground connection 16 (in main wiring harness)

(383) - Ground connection 18 (in main wiring harness)

(655) - Ground connection on left headlamp Overview Of Ground Connections in Front Part Of Vehicle

(B315) - Positive connection 1 (30a) (in main wiring harness)

(B549) - LIN bus connection 2 (in main wiring harness)

* - E-Box low

*2 - E-Box high

*3 - Only for left-hand drive vehicles

*4 - Only for right-hand drive vehicles

Previous Diagram 126/16 (Tracks 197-210)

Next Diagram 126/18 (Tracks 225-238)