Operation CHARM: Car repair manuals for everyone.

Diagram 121/2 (Tracks 1-14)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Generator (GEN), Voltage Regulator (VR), Fuses SA1, SA2, SA3





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

C - Generator (GEN)

C1 - Voltage Regulator (VR)

J500 - Power Steering Control Module Control Modules in Front Part Of Vehicle

J533 - Data Bus On Board Diagnostic Interface Control Modules in Interior Of Vehicle

SA1 - Fuse 1 (on fuse panel A) Overview Of Fuses

SA2 - Fuse 2 (on fuse panel A) Overview Of Fuses

SA3 - Fuse 3 (on fuse panel A) Overview Of Fuses

T2a - Double Connector, black (Connector A)

T2by - Double Connector (Connector A)

T4 - 4-Pin Connector, black, in engine compartment, front left

T4d - 4-Pin Connector, black, on coolant fan control (FC) (front end)

T20d - 20-Pin Connector, black (Connector A)

(18) - Ground Connection (on engine block)

(671) - Ground Connection 1 (on left front long member) Overview Of Ground Connections in Front Part Of Vehicle

(B698) - LIN-Bus Connection 3 (in main wiring harness)

** - => Applicable Wiring Diagram Coolant Fan Control

# - Only models with generator (140A)

Next Diagram 121/3 (Tracks 15-28)