Spoiler

Spoiler






1 Spoiler

• When installing, the clips - arrow - must engage completely into the bumper cover

2 Bumper cover

• Installed

3 Bolt

• 1.5 Nm

Removing






- Remove the bolts - 1 - and - 3 - on the spoiler - 2 - for the bumper cover.

- Unclip the bumper cover spoiler - 2 - from the bumper cover - 1 - in the sequence - A to C arrows - beginning above the tail pipe.






Installing

• Tightening specifications, refer to => [ Rear Bumper Assembly Overview ] Rear Bumper Assembly Overview.

Install in reverse order of removal. Note the following:

- When pressing on, make sure the end points are guided into the bumper cover before pressing on for the final time.