Front Door Striker: Service and Repair

Striker Pin

Removing






- Remove the bolts- 2 - and the striker pin - 1 -.

Installing

• Tightening specifications, refer to => [ Door Lock and Striker Pin Assembly Overview ] Door Lock and Striker Pin Assembly Overview.

Installation is performed in the reverse order of removal:

• The striker pin backing must be position with the pins - arrows - exactly in the hole.

• The striker pins must be sheared off cleanly after sliding the striker pin.

• If a new part is being installed, then remove the sheared off pins from the striker pin.

•

- Striker Pin, Adjusting, refer to => [ Adjusting with striker pin ] Door, Adjusting.