Headrests With Locking Mechanism

Headrests with Locking Mechanism

• The headrests can be removed with the front seat installed.

• The release button is located on the outer left of the driver seat and inner left of the passenger seat.

Removing






- Find release button pressure point - 3 -. It is located under the backrest cover.

- Press the release button forward in the direction of the - arrow -.

- Hold the release button down in this position.

- Pull headrest - 2 - up out of guides - 1 - and - 4 -.

• If the release button cannot be released as described, remove the backrest cover. Refer to => [ Backrest Cover (Section Two) ] Backrest Cover (Section Two) for the two-section backrest cover and refer to => [ Backrest Cover (Section One) ] Backrest Cover (Section One) for the one-section backrest cover. Reach under the backrest cover and find the pressure point on the release button.

Installing

Install in reverse order of removal. Note the following:

- Make sure the headrest is engaged correctly in headrest guides.