Front Noise Insulation Assembly Overview

Front Noise Insulation Assembly Overview






1 Noise Insulation

• Removing

• Front wheel spoiler removed, refer to => [ Front Wheel Spoiler Assembly Overview ] Description and Operation

- Remove the screws - 1 - and - 2 -, as well as the lower wheel housing screws (3 on each side) and remove the noise insulation under the bumper.

• When installing, slide the front noise insulation in under the bumper.

• Make sure that the exhaust pipe is correctly routed through the noise insulation for vehicles with auxiliary heater.

2 Bolt

• 5 Nm

• quantity: 2

3 Quick-release fastener

• Rotate 180° to the left to remove.

• When installing, the connection must engage when rotating.

4 Washer

5 Rear noise insulation

6 Lock Carrier

Vehicles equipped with an auxiliary heater






- For vehicles with auxiliary heater, the exhaust pipe opening - arrow - must run vertically through the grommet in the noise insulation.