Garage Door Opener Control Head (E284)

Garage Door Opener Control Head (E284)

Removing






- Remove the interior lamp/ front reading lamp. Refer to => [ Interior Lamp/Front Reading Lamp ] Interior Lamp/Front Reading Lamp.

- Remove the anti-theft alarm system sensor (G578) if applicable. Refer to => [ Anti-Theft Alarm System Sensor ] Anti-Theft Alarm System Sensor.

- Release the retaining clips - arrows - and remove garage door opener control head - item 1 - from the interior lamp/front reading lamp - 2 -.

Installing

Install in reverse order of removal, observing the following:

- Install the interior lamp/ front reading lamp. Refer to => [ Interior Lamp/Front Reading Lamp ] Interior Lamp/Front Reading Lamp.