Halogen Headlamp Overview, Through MY 2012
Halogen Headlamp Overview, through MY 2012
Observe the notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.
• Headlamps must be adjusted after performing measures that could influence the headlamp adjustment. Refer to => [ Headlamps and Fog Lamps, Checking and Adjusting ] Adjustments.
Part 1
1 Headlamp Washer System Spray Nozzle
2 Screw
• Tightening specification, refer to => [ Headlamp Housing Mount Overview, through MY 2012 ] Headlamp Housing Mount Overview, Through MY 2012.
3 Bracket
• Overview, refer to => [ Headlamp Housing Mount Overview, through MY 2012 ] Headlamp Housing Mount Overview, Through MY 2012.
4 Vent Tube Adapter
• For the headlamp.
• There are different versions. Refer to the Parts Catalog.
5 Screw
• Tightening specification refer to => [ Headlamp Housing Mount Overview, through MY 2012 ] Headlamp Housing Mount Overview, Through MY 2012.
6 Screw
• Tightening specification refer to => [ Headlamp Housing Mount Overview, through MY 2012 ] Headlamp Housing Mount Overview, Through MY 2012.
7 Ventilation Hose
• Tightening specification refer to => [ Headlamp Housing Mount Overview, through MY 2012 ] Headlamp Housing Mount Overview, Through MY 2012.
8 Bracket
9 Screw
• 1.8 Nm
10 Screw
• 4.5 Nm
11 Screw
• 4.5 Nm
12 Screw
13 Bracket
14 Screw
• 4.5 Nm
15 Speed Nut
16 High Beam Bulb
• Left high beam headlamp bulb (M30)
• Right high beam headlamp bulb (M32)
• 12 V, 55 W (H7)
• Replacing, refer to => [ High Beam Bulbs (M30)/(M32) ] High Beam Bulbs (M30)/(M32).
17 Cap
• For the high beam bulb.
18 Cap
• For the low beam bulb.
19 Low Beam Bulb
• Left low beam headlamp bulb (M29)
• Right low beam headlamp bulb (M31)
• 12 V, 55 W (H7)
• Replacing, refer to => [ Low Beam Bulb (M29)/(M31) ] Low Beam Bulb (M29)/(M31).
20 Headlamp
• The front side marker lamp bulb is an Light Emitting Diode (LED) and is integrated in the headlamp. The LED cannot be replaced. The entire headlamp must be replaced.
• Removing and installing, refer to => [ Headlamp ] Headlamp.
21 Screw
• Tightening specification, refer to => [ Headlamp Housing Mount Overview, through MY 2012 ] Headlamp Housing Mount Overview, Through MY 2012.
22 Speed Nut
23 Screw
• Tightening specification, refer to => [ Headlamp Housing Mount Overview, through MY 2012 ] Headlamp Housing Mount Overview, Through MY 2012.
24 Speed Nut
25 Bracket
• Overview, refer to => [ Headlamp Housing Mount Overview, through MY 2012 ] Headlamp Housing Mount Overview, Through MY 2012.
26 Screw
• Tightening specification, refer to => [ Headlamp Housing Mount Overview, through MY 2012 ] Headlamp Housing Mount Overview, Through MY 2012.
27 Screw
28 Front Airbag Crash Sensor
Part 2 - Repair Kits
1 Headlamp
• Removing and installing, refer to => [ Headlamp ] Headlamp.
2 Front Turn Signal Bulb
• Left front turn signal bulb (M5)
• Right front turn signal bulb (M7)
• 12 V, 24 W - yellow
• Replacing, refer to => [ Front Turn Signal Lamp Bulbs (M5)/(M7) ] Front Turn Signal Lamp Bulbs (M5)/(M7).
3 Seal
• Not available separately as a replacement part.
4 Turn Signal Housing Cap
• The headlamp must be cut open to replace the bulb.
• The cap can be ordered to seal the headlamp opening. Refer to the parts catalog.
• Removing and installing => [ Front Turn Signal Lamp Bulbs (M5)/(M7) ] Front Turn Signal Lamp Bulbs (M5)/(M7)
5 Screw
• 2 Nm
• From the turn signal cover repair kit.
6 Headlamp Range Control Positioning Motor
• Left headlamp beam adjustment motor (V48). Removing and installing, refer to => [ Left Headlamp Beam Adjustment Motor (V48) ] Left Headlamp Beam Adjustment Motor (V48).
• Right headlamp beam adjustment motor (V49) ; not available separately as a replacement part.
7 Seal
• Not available separately as a replacement part.
8 Headlamp Range Control Positioning Motor Housing Cap
• only for the left headlamp
• The headlamp must be cut open to replace the positioning motor.
• The cap can be ordered to seal the headlamp opening. Refer to the parts catalog.
• Removing and installing, refer to => [ Left Headlamp Beam Adjustment Motor (V48) ] Left Headlamp Beam Adjustment Motor (V48).
9 Screw
• 2 Nm
• From the headlamp range control positioning motor cover repair kit.
10 Screw
• 1.4 Nm
11 Parking Lamp/Daytime Running Lamp Housing Cover
• The headlamp must be cut open to replace the bulb.
• A housing cover can be ordered to seal the headlamp opening. Refer to the parts catalog.
• Removing and installing, refer to => [ Front Daytime Running Lamp Bulbs (L174)/(L175) ] Front Daytime Running Lamp Bulbs (L174)/(L175).
12 Daytime Running Lamp Bulb
• Left daytime running lamp bulb (L174).
• Right daytime running lamp bulb (L175).
• 12V, 13 W
• Replacing, refer to => [ Front Daytime Running Lamp Bulbs (L174)/(L175) ] Front Daytime Running Lamp Bulbs (L174)/(L175).
13 Parking Lamp/Daytime Running Lamp Bulb
• Left side marker lamp bulb (M1).
• Right side marker lamp bulb (M3).
• With daytime running lamp function.
• Parking lamp 70% dimmed.
• 12V, 13 W
• Replacing, refer to => [ Left and Right Side Marker Lamp Bulbs (M1)/(M3) ] Left and Right Side Marker Lamp Bulbs (M1)/(M3).
14 Parking Lamp/Daytime Running Lamp Housing Cover
• The headlamp must be cut open to replace the bulb.
• The housing cover can be ordered to seal the headlamp opening. Refer to the parts catalog.
• Removing and installing, refer to => [ Front Daytime Running Lamp Bulbs (L174)/(L175) ] Front Daytime Running Lamp Bulbs (L174)/(L175).