Front Door Lamps and Switches

Window Regulator Switch

Removing






- Turn off the ignition and remove the ignition key.

- Insert a screwdriver in the hole at the bottom of the trim - 1 -.

- Beginning at the rear, carefully pry the trim out of the door trim - arrow -.

- Disconnect the electrical connector - 3 -.






- Carefully pull the retaining tabs to the side - A arrows -.

- Press the window regulator switch - 2 - out of the switch mount - 1 - - B arrows -.

Installing

Install in reverse order of removal, observing the following:

- Press window regulator switch into switch mount until fasteners engage.

- Install the armrest trim.