Operation CHARM: Car repair manuals for everyone.

Luggage Compartment Relay and Fuse Carrier and Control Modules Overview






Luggage Compartment Relay and Fuse Carrier and Control Modules Overview

Observe the notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.






1 Fuse Panel F (SF)

Removing and installing, refer to => [ Fuse Panel. Right Luggage Compartment ] Fuse Panel. Right Luggage Compartment.

2 Parking Aid Control Module (J446)

Overview, refer to => [ Parking Aid Overview ] Parking Aid Overview.

3 Retaining Frame

For the control modules.

For vehicles without a trailer hitch.

4 Towing Recognition Control Module (J345)

Removing and installing, refer to => [ Towing Recognition Control Module ] Service and Repair.

5 Auxiliary Heater Radio Receiver (R64)

Does not apply to the US/Canadian market.

6 Retaining Frame

For the control modules.

For vehicles with a trailer hitch.

7 Electromechanical Parking Brake Control Module (J540)

8 Retaining Frame

For the control modules.

9 Comfort System Central Control Module (J393)

Removing and installing, refer to => [ Comfort System Central Control Module (J393) ] Comfort System Central Control Module (J393).

10 Special Purpose Vehicle Control Module (J608)

In the luggage compartment, on the right side.

Removing and installing, refer to => [ Special Purpose Vehicle Control Module ] Special Purpose Vehicle Control Module.

11 Vehicle Positioning System Interface Control Module (J843)

12 Rear View Camera System Control Module (J772)

13 Retaining Frame

For the control modules.

14 Electronic Damping Control Module (J250)

Fuse Panel F Nut Tightening Specifications






1 Fuse panel F
2 Fuse panel
4 Nut - 3 Nm
5 Relay/control module

Comfort System Central Control Module Retaining Frame Nut Tightening Specifications






- Tighten the nuts - arrows - to 3 Nm.

1 Retaining frame

Special Purpose Vehicle Control Module Retaining Frame Bolt/Nut Tightening Specifications






- Tighten the bolts - 1 and 2 - to 3 Nm.

- Tighten the nut - 4 - to 3 Nm.

3 Retaining frame