Bumper Cover Lower Section

Bumper Cover Lower Section

Removing






- Remove the bolts - 1 - and - 3 - on the bottom part of the bumper cover - 2 -.

- Unclip the bottom part of the bumper cover - 2 - from the bumper cover - 1 - in the sequence - A to C arrows - beginning above the exhaust pipe.






Installation

• Tightening specifications, refer to => [ Rear Bumper Cover Overview ] Rear Bumper Cover Overview.

Installation is reverse of removal, but note the following:

- When pressing on, make sure the end points are guided into the bumper cover before pressing on for the final time.