Rear Vent

Rear Vent

Special tools, testers and auxiliary items required

• Hook (3438)

Removing






• The vent has a hole on both sides for attaching the hook (3438).

- Alternating between the sides, carefully remove the vent - 1 - from the installation opening using the (3438).

- Vehicles with illumination: disconnect the connector

Installing

Installation is reverse of removal, but note the following:

- When sliding the vent into the center console, make sure the air duct engages correctly.

- Insert the lower vent, tilt it upward and press it into the installation opening as far as the stop.