Central Locking System Overview
Central Locking System Overview
Hood Switch, SAFE Indicator Lamp, Driver and Front Passenger Door Control Module
1 Engine Hood Contact Switch (F266)
• Location: inside the rear lid lock.
• Removing and installing, refer to => [ Engine Hood Contact Switch (F266) ] Engine Hood Contact Switch (F266).
2 Front Passenger Door Control Module (J387)
• Removing and installing, refer to => [ Driver and Front Passenger Door Control Modules (J386)/(J387) ] Driver and Front Passenger Door Control Modules (J386)/(J387).
3 Right Rear Door Control Module (J389)
• Removing and installing, refer to => [ Left and Right Rear Door Control Modules (J388)/(J389) ] Left and Right Rear Door Control Modules (J388)/(J389).
4 Left Rear Door Control Module (J388)
• Removing and installing, refer to => [ Left and Right Rear Door Control Modules (J388)/(J389) ] Left and Right Rear Door Control Modules (J388)/(J389).
5 Central Locking -SAFE- Indicator Lamp (K133)
6 Driver Door Control Module (J386)
• Removing and installing, refer to => [ Driver and Front Passenger Door Control Modules (J386)/(J387) ] Driver and Front Passenger Door Control Modules (J386)/(J387).
Comfort System Central Control Module, Rear Lid Lock Cylinder Contact Switch, Central Locking Motor in Rear Lid, Anti-Theft Alarm System Sensor and Fuel Tank Lid Unlock Motor
1 Anti-Theft Alarm System Sensor (G578)
2 Fuel Filler Door Unlock Motor (V155)
• Removing and installing, refer to => [ Fuel Filler Door Unlock Motor (V155) ] Fuel Filler Door Unlock Motor (V155).
3 Mounting Bracket
• For control modules
4 Comfort System Central Control Module (J393)
5 Rear Lid Lock
• With the rear lid central locking system motor (V53) / rear lid alarm switch (F123) , cannot be replaced separately.
• Overview, refer to => [ Rear Lid Lock, Lock Cylinder and Grip Piece Overview ] Service and Repair.
6 Rear Lid Lock Cylinder Unlock Button (F248)
• Integrated inside the handle strip, cannot be replaced separately.
• Removing and installing, refer to => [ Grip ] Grip.
Vehicle Positioning System Interface Control Module (J843) , Removing and Installing
- Open the cover in the side trim panel.
- Disconnect the control module connectors - 1 -.
- Loosen the locking mechanism - arrow - and remove the control module out of the control module mount - 2 -.