Rear Backrest

Rear Backrest

• The split rear seat backrest cannot be removed or installed separately.

Removing

Do not load the rear seat backrest when it is folded down.

- Tilt the front seat backrests as far forward as possible.

- Move the front seats as far forward as possible.

- Remove the seat bench. Refer to => [ Bench Seat ] Bench Seat.

- Remove the rear belt latch. Refer to => [ Rear Belt Latch ] Rear Belt Latch.

- Remove the side cushion. Refer to => [ Side Upholstery ] Side Upholstery.

- Remove the front luggage compartment floor covering. Refer to => [ Front Luggage Compartment Covering ] Front Luggage Compartment Covering.

- Unlock the left and right rear seat backrest and fold them forward.

- Remove the backrest frame bolts - 1 - and - 2 -.






- Disengage the backrest frame from the threaded pin and remove the rear seat backrest - 3 - from the vehicle.

Installing

Do not load the rear seat backrest when it is folded down.

- Mount the backrest frame on the threaded pin and tighten the screws hand-tight.

- Fold the left and right rear seat backrests back up and lock them.

- Tighten the bolts - 1 -.

- Unlock the left and right rear seat backrest and fold them forward.

- Tighten bolt - 2 -.

Further installation is performed in the reverse order of removal.

For the correct tightening specifications; refer to => [ Rear Seat Backrest Assembly Overview ] Rear Seat Backrest Assembly Overview.