Brake Caliper

Brake Caliper

• Do not loosen the bolts - 1 - to remove the brake caliper.






4 - Brake Caliper

• Do not hang on brake hose during necessary installation steps, but rather secure to body with wire.

10 - Bolts

• Always replace if removed.

• 196 Nm.

11 - Brake Carrier

• Attach to wheel bearing housing.

• Bolted to the brake caliper.

• 190 Nm.

13 - Bracket Bolt

• 25 Nm

16 - Bracket for Brake Line

• Hook in brake line.

• Do not loosen the bolts - 1 - to remove the brake caliper.






Removing

- Remove the brake line bracket.

- Remove both bolts from the brake carrier - 10 -.

- remove brake caliper. The brake carrier - 11 - remains on the brake caliper.

Installing

- Installation is performed in reverse sequence.

• Make sure the brake hose is not twisted.

Make sure the brakes are working correctly before driving the vehicle for the first time.